- Enter again in Bios Setup. - Plug the USB pen into one port on the back panel (better to use a 2.0). - Click on M-Flash then select the file on the USB pen. - M-Flash should start; be cautious to not abort it before the end (can last up to 5mn) Trying to update the BIOS on my MSI X99 Gaming Pro Titanium, but I can't get the new BIOS file to show up in the M-Flash tool. I formatted a USB drive on my MacBook, with the options FAT and GUID partition map. I transferred the BIOS file over to the drive, plugged it into the box in question, and entered M-Flash However when booting and using the M-Flash in the boot menu, it only recognizes the folders in the USB drive bot not the files. The reason I need to update my bios is to check whether it does resolve some memory stability issues I was experiencing when using XMP on my G.skill Trident Z 3200MHz kit Trying to update the BIOS. I have the Null string but when clicking on it the message that no BIOS file does not exist. I tried basically redoing the USB but leaving the file on the root and still nothing. Multiple different ports. I can see the USB in my boot options
every time i try and update my bios in m flash it says bios file does not exist any help please?i have upgraded to a ryzen 7 3700x from a ryzen 5 2600 when i installed my ryzen 3700x didnt post i thought i had to update my bios further my bios is currently version 7b86vA8 and now i cant update the bios and use my new cpu please help if possibl This code checks for the existence of the folder (see the ending backslash, just to differentiate a folder from a file with the same name). If it does not exist then it is created and creation status is checked. If a file with the same name exists or you have no rights to create the folder, it will fail. If everyting is ok, files are copied Got the error message : Bios\New\68SSR.s12 not found. For sure, no .s12 file within this directory. Only a .bin and a .sig files are present. The USB disk struture is built as following: \HEWLETT-PACKARD directory at root containing 2 directories: BIOS and BiosUpdate (and a log file) BIOS holds 2 directories: Current et New, each of them gets 2 files: 68SSR.bin and 68SSR.si When I used the mouse to select the null message, it would simply say no BIOS file found and would only give the option to exit M-Flash and reboot. He thinks it was just a compatibility issue in my case....maybe another piece of installed hardware...suggested waiting for the next BIOS Furthermore, it may solve compatible issues with SNB code-based BIOS (ex:V150). Test Configuration: CPU: Intel® Core™ i7-2655LE CPU @2.20GHz BIOS: MIC 3395v150 V218 FPGA: 08 RAM: 4G USB Stick: Transcend 4GB Steps: 1. Put the files, which is downloaded from website, into the DOS bootable USB. 2. Boot into BIOS and select the boot priority
open C: \ Users \ MYNAME \ AppData \ Local \ Paradox Interactive \ launcherpath: the system cannot find the file specified. Detailed logs can be found at: C: \ Users \ MYNAME \ AppData \ Local \ Paradox Interactive \ launcher-v2 \ launcher-dowser.log. If the error persists, please contact support After rebooting the PC from a bootable (DOS) USB-Stick, CD or Diskette, you will see the old famous DOS-Prompt (A:\>) on your boot screen. Insert the command dir (dir = list directory) at the DOS-Prompt to list all files on the drive. The following example shows the flashtool (AFUDOS.EXE) and the BIOS file (NEWBIOS.ROM) Extract the BIOS-zip file that you have downloaded and paste it to your USB storage device. 4. Press delete key to BIOS, select M-Flash 5. Click Select one file to update BIOS and ME 6. Select USB storage that comes with the downloaded BIOS. (below shows the USB storage device use for bios update). 7. Select BIOS which you want to update and press Enter. 8. A warning. 3. Unzip the download BIOS file. 4. Copy the folder to USB flash. e.g. Copy the EB926IMS.B30 file to the USB flash drive directory. Please do not locate it under any other folder to avoid BIOS ROM detection failed. 5. Power on the device and press the [Delete] button to enter the BIOS interface. Then, select [M-FLASH]. 6. Select [Yes] to.
EasyFlash recognizes the BIOS file but when I press Enter to flash I get: Model name doesn't match! Force to update BIOS? Yes No EasyFlash specifies the old BIOS as K43BY. The new BIOS file is K43BY-215 and was downloaded from Asus's page with A53U drivers. So what the heck does not match? And should I go ahead and force the flashing C:\test> afud4234 BIOS file (to save or not to save old BIOS is the user's decision) 6. Reboot your system when prompted Flashing the BIOS for Non-FAT file system 1. Know your model number a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, also check the version number that is written there as well.